Zero Moment Point Totally Explained

Everything about Zero Moment Point totally explained

Zero Moment Point is a concept related with dynamics and control of legged locomotion, for example, for humanoid robots. It specifies the point with respect to which dynamic reaction force at the contact of the foot with the ground doesn't produce any moment, for example the point where total inertia force equals 0 (zero). The concept assumes the contact area is planar and has sufficiently high friction to keep the feet from sliding. The ZMP is no longer meaningful if the robot makes multiple non-planar contacts (Goswami, 1999).

Introduction

This concept was introduced in January 1968 by Miomir Vukobratović at The Third All-Union Congress of Theoretical and Applied Mechanics in Moscow. In the following works and papers that were produced between 1970 and 1972 it would then be called zero moment point and would be spread around the world.
   The zero moment point is a very important concept in the motion planning for biped robots. Since they've only two points of contact with the floor and they're supposed to walk, “run” or “jump” (in the motion context), their motion has to be planned concerning the dynamical stability of their whole body. This isn't an easy task, especially because the upper body of the robot (torso) has larger mass and inertia than the legs which are supposed to support and move the robot. This can be compared to the problem of balancing an inverted pendulum.
   The trajectory of a walking robot is planned using the angular momentum equation to ensure that the generated joint trajectories guarantee the dynamical postural stability of the robot, which usually is quantified by the distance of the zero moment point in the boundaries of a predefined stability region. The position of the zero moment point is affected by the referred mass and inertia of the robot’s torso, since its motion generally requires large ankle torques to maintain a satisfactory dynamical postural stability.
   One approach to solve this problem consists in using small trunk motions to stabilize the posture of the robot. However, some new planning methods are being developed to define the trajectories of the legs’ links in such a way that the torso of the robot is naturally steered in order to reduce the ankle torque needed to compensate its motion. If the trajectory planning for the leg links is well succeeded, then the zero moment point won’t move out of the predefined stability region and the motion of the robot will become smoother, mimicking a natural trajectory.

ZMP Computation

The resultant force of the inertia and gravity forces acting on a biped robot is expressed by the formula:
ť

F_

where

P

is a point of the sole where is the normal projection of the ankle.

Further Information

Get more info on 'Zero Moment Point'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://zero_moment_point.totallyexplained.com">Zero Moment Point Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.